HiYi ATEX IECEx RS485 4-20 MA Remote Online Cl2 Gas Monitoring Fixed Chlorine Gas Detector
MIC500 Multi Fixed Gas Monitoring System
Single Gas | Remote Control | LED Display | Alarm
OVERVIEW
MIC500s Series gas detector can be used in 24 hours continuous online monitoring of concentrations of multiple types of gases in the filed,with LED display ,could show the concentration of the gas real-time.
The types for detection are more than 500 types.
With a 4-20 mA analogue output, can be simply integrated into a Distributed Control System (DCS) to provide warnings and enable control of high levels in the working environment.
Strong, durable and explosion-proof shell and fluorocarbon surface treatment process are suitable for the use at a variety of hazardous places and corrosive environments, it is wear-resistant.
Simple calibration procedure.
Easily integrated into a control system.
FEATURES & BENEFITS
1. Fast and efficient gas detection function
2. Diversified communication methods
- It is possible for the real-time monitoring via the wired or remote wireless transmission, and network transmission.
- Three-wire system 4 ~ 20mA standard signal and standard bus RS485 (modbus-RTU) simultaneous output.
- It is compatible with secondary instrument, data acquisition module, PLC, DCS system, and it is possible to drive the related equipment.
3. Powerful and convenient humanized function
- Data recovery function; Multiple alarm modes;Mis-operation recognition function;
- Zero-point automatic tracking;Multi-level calibration for target points,etc.
4.Optional functions
It is possible to transfer data wirelessly to the cell phone, remote monitoring center, monitoring computers and other monitoring equipment, which will utilize the upper-level host to realize the functions of data analysis, storage, printing or the like on the computer.
①Room temperature and high humidity pretreatment system
②High temperature and high humidity pretreatment system
③High dust pretreatment system
INSTALLATION INSTRUCTIONS
①wall mounting bracket
②mounting clips for fixation on the pipes (1/2", 3/4" pipe)
③stainless steel threaded welding seat or flange to be installed on the pipeline (it is necessary to mark the flange or pipe size, such as DN50, DN15 ...)
④Rain cover
⑤24VDC or 220AC sampling pump (sampling distance is 10 m)
⑥vacuum pump (sampling distance is greater than 40 m)
⑦24V switching power supply
⑧pressure reducing valve
⑨flow meters
SPECIFICATION
| Gases to be detected | Toxic gases, oxygen gas, carbon dioxide, inflammable and explosive gases, TVOC, and so on. |
| Detection range | 0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 200 mg/L, 100%LEL, 20%, 50%, 100%Vol, can be selected; and other ranges can be customized. |
| Resolution | 0.01ppm or 0.001ppm (0 ~ 10 ppm)
0.01ppm (0 ~ 100 ppm)
0.1ppm (0 ~ 1000 ppm)
1ppm (0 ~ 10000 ppm or more)
0.01 mg/l (0 ~ 200 mg/l)
0.1% LEL
0.01%Vol 0.001% Vol Other ranges can be customized |
| Detection principle | Electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization, and so on. Depending on the type of gas, range, field environment and user demand, Sensor can be customized |
| Sensor service life | Electrochemical principle: 2 ~ 3 years; Oxygen gas: 2 years or 6 years can be selected; Infrared principle: 5 ~ 10 years;
Catalytic combustion: 3 years; Thermal conductivity: 5 years. |
| Allowable error | ≤±3% F.S (other or higher precision levels can be customized) |
| Linearity | ≤±2% | Repeatability | ≤±2% | Uncertainty | ≤±2% |
| Response time | T90≤20 seconds | Recovery time | ≤30 seconds |
| Working environment | Temperature: -40 ℃ ~ + 70 ℃, humidity: ≤10 ~ 95% RH (regular) |
| Display method | 1.7-inch high-definition color screen |
| Working voltage | 12 ~ 30VDC direct current the standard power supply for a single equipment is 24V, DC stabilized voltage switching power supply of 1A or greater than 1A |
| Power supply reference | 24V, 2.1A is possible to drive 40 units of toxic gas detector, or 15 units of flammable, infrared gas detector. |
| Working method | Fixed type installation, online detection, diffusion type measurement |
| Protection level | IP65 |
| Explosion-proof type | Explosion suppression type |
| Explosion-proof mark | ExdⅡCT6, certificate number: CNEx15.1283 |
| Exterior dimensions | 210×170×85mm (L×H×W) |
| Weight | 1.8Kg |
| Standard accessories | Manual, qualification certificate, warranty card, outer packaging box |
APPLICATION
All the cases which requires the fixed installation, and online detection of gas concentrations such as Chemical Industry, Power Generation Plants, Natural Gas Pipeline & Processing,Pulp & Paper Industry, Waste Water Treatment Plants, Commercial & Industrial HVAC, Acetylene Gas Bottlers & Users , Ice Skating & Hockey Arenas,Cannabis & Hemp Oil, Breweries and so on.
Product Tags:
|
|
Remote Online Cl2 Gas Monitoring Fixed Chlorine Gas Detector Images
|
